Search
Español

Materiales de construcción

Monitorización y control de la temperatura del proceso de molienda con el MM 500 control

Un punto aparentemente trivial pero potencialmente desafiante en un proceso de homogeneización de la muestra es su estado original. La preparación de muestras en molinos de bolas, por ejemplo, se basa en el mecanismo físico de impacto y fricción. Estos dos mecanismos implican un proceso de calentamiento que plantea un serio problema para los materiales termosensibles. El MM500 control es el primer molino de bolas de laboratorio diseñado especialmente para procesar materiales sensibles a la temperatura.

Volver

Libro blanco (2)

  • White Paper. Different sieving methods for a variety of applications

    The determination and knowledge of the particle size distribution is an essential part of the quality control process for industrial products. Easy handling, low investment cost and high accuracy make sieve analysis one of the most frequently used procedures for measuring the particle size. This white paper gives an overview of the different sieving techniques and describes the necessary steps to ensure reliable results.

  • White Paper: Ultrafine Grinding with Laboratory Ball Mills

    How are nano particles produced? The “Bottom-Up” method synthesizes particles from atoms or molecules. The “Top-Down” method involves reducing the size of larger particles to nanoscale, for example with laboratory mills. Nano particles are produced by colloidal grinding which involves dispersion of the particles in liquid to neutralize the surface charges. Factors such as energy input and size reduction principle make ball mills the best choice for the production of nanoparticles.

Folletos (2)

Informes técnicos (17)

  • La nueva generación de molinas planetarios de bolas

    Los más precisos resultados de trituración en el más breve tiempo se consiguen con los nuevos molinos planetarios de bolas, de Retsch. Con el PM100 y el PM200, Retsch presenta una nueva generación de molinos planetarios de bolas con uno o dos unidades de trituración, que establecen nuevos estándares de rendimiento en este segmento de la producción.

  • Materias primas renovables a la vanguardia

    Particularidades de la preparación de plantas

  • Molienda ultrarrápida y ultrafina

    El nuevo molino ultracentrífugo ZM 200 de RETSCH es un molino de rotor no sólo extremadamente rápido y cuidadoso con el material molido, sino también de uso universal gracias a su amplia gama de accesorios.

  • Pequeñas partículas ayudan a preservar la Catedral de Colonia

    The Cologne Cathedral is a venerable old building whose historic substance is preserved by continuing restoration works. Mortar is one of the construction materials that the conservators use for preservation and restoration of the ancient stones. To obtain mortar with optimum quality, the conservators at the cathedral workshop in Cologne use a RETSCH sieve shaker to determine the particle size distribution of the material.

  • Preparación de muestras altamente heterogéneas para el control de calidad

    El agotamiento de los recursos y el aumento del precio de los combustibles primarios tales como el petróleo, el gas o el carbón han obligado a la industria del cemento a buscar fuentes alternativas de energía. Otro factor contribuyente es, sin duda, el comercio de emisiones que hace todavía más rentable el cambio a fuentes de energía con un balance neutro de CO2, en su mayoría combustibles no fósiles. En los últimos años, se ha registrado un incremento en el uso de fuentes de energía alternativas, especialmente por aquellas industrias con una alta demanda energética. En consecuencia, viene ganando cada vez más importancia el empleo de combustibles secundarios o alternativos, que en su mayoría son extraídos de residuos urbanos e industriales – es decir, residuos urbanos que no han podido ser recuperados ni reciclados.

  • Preparación de muestras para el análisis por fluorescencia de rayos X

    De la muestra al comprimido

  • White Paper: Análisis por tamizado - diferentes métodos de tamizado para diversas aplicaciones

    Un gran número de propiedades físicas y químicas dependen del tamaño de las partículas. Desde la inspección de entrada y el control de producción hasta la investigación y el desarrollo, los análisis por tamizado se utilizan para determinar diversos parámetros o simplemente el tamaño de las partículas. En este artículo se presenta un resumen de las diferentes técnicas de tamizado y de los pasos necesarios para asegurar unos resultados precisos.

  • Air Jet Sieving of Bulk Materials

    Particle size analysis and particle size distribution are important criteria for the quality control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.

  • Fast, fine and reproducible - Sample Prep for XRF Analysis

    The overall procedure of X-ray fluorescence analysis may be divided into three different stages: sampling, sample preparation and the actual spectrometric analysis itself. Of these three, it is usually the mechanical sample preparation that takes up most of the time and will therefore be discussed in this application report.

  • Mixer Mill MM 400: Upgrade of a True Multipurpose Mill

    With the Mixer Mill MM 400 RETSCH has developed a true multipurpose mill which covers a huge range of applications, including classic mixing and homogenization but also more complex tasks like cell disruption via bead beating or mechanochemical processes. The ease of use of mixer mills in general, combined with a wealth of accessories make the MM 400 the perfect choice for quick, safe and reproducible processing of small sample volumes.

  • Representative results require adequate sample preparation

    The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? It is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.

  • Sample Division of Large Volumes

    Representative sampling of large sample volumes is an integral part of the physical and chemical analysis of bulk goods and has a decisive influence on the quality of the results. Extraction of a sample from the bulk is not always carried out in a way to ensure representativeness. This is a widespread flaw in the quality control process with a negative impact on the subsequent analysis results. RETSCH provides some convenient solutions which help to improve working conditions and thereby the quality of the sampling process.

  • Sample Preparation for X-Ray Diffraction Analysis

    The XRD-Mill McCrone preserves the crystal lattice structure of the sample - With resources becoming increasingly scarce, innovative technologies allowing for sustainable use of raw materials are much sought after. The mineralogist Dr. Robert Moeckel is researching mineral and metallic raw materials at the Helmholtz-Institute for Technology of Resources in Freiburg, Germany. Dr. Moeckel´s research projects involve pulverization and homogenization of mineral samples prior to x-ray diffraction (XRD) analysis.

  • Separation of large sample volumes with the AS 450 control

    Particle analysis of large quantities of bulk goods is usually done by vibratory sieving. In most vibratory sieve shakers in the market the sieve stack is mounted on springs which oscillate vertically. However, to evenly distribute the material over the entire sieve surface, the so called 3D vibratory sieving as it is used in the AS 450 control is the most suitable method.

  • Sieving of agglomerating powders with the air jet sieving machine AS 200 jet

    Air jet sieving is usually the method of choice for dry sieving of materials with particle sizes below 40 microns. However, it is also a faster alternative to vibratory sieving of materials of up to 250 microns.

  • Small particles help to preserve the Cologne Cathedral

    The Cologne Cathedral is a venerable old building whose historic substance is preserved by continuing restoration works. Mortar is one of the construction materials that the conservators use for preservation and restoration of the ancient stones. To obtain mortar with optimum quality, the conservators at the cathedral workshop in Cologne use a RETSCH sieve shaker to determine the particle size distribution of the material.

  • The New Planetary Ball Mill PM 300

    Planetary ball mills meet and exceed all requirements for fast and reproducible grinding to analytical fineness. They are used for the most demanding tasks in the laboratory, from routine sample processing to colloidal grinding and advanced materials development. With the new PM 300 RETSCH has developed a powerful tool which offers high sample throughput combined with ease-of-use.

Referencias de clientes (3)

Informes de pruebas de laboratorio (49)